Preferences
Bandwidth
Photos
Album main
(12-31-69)
Search
Add Object
Edit this
Resume
Resume Home
Resume builder
Projects
Weather
Weather stations snapshot
Weather charts POC
Rain charts
Home controller POC
Webcams
Github repos
Sites
Sites
dea42.com
avatar42.com
a42.me
Pages
Wunderground
Facebook
LinkedIn
My Twitter
Blogger (multiple blogs)
My Mastodon
First blog
Site's Twitter
Site's Mastodon
Logout as home
Installing a CD changer in a Montero
Description:
Installing a CD changer in a Montero
Data Last Updated:
2003-05-20 15:13:03.0
Name:
Installing a CD changer in a Montero
Type:
Auto
Comments:
Page
1
of 1
25
50
100
200
500
1000
10000
items per page
22 pics are linked to this object.
2003-4-12
All installed
(129 kb)
Edit it
(05-20-03)
2003-4-12
All trays installed
(151 kb)
Edit it
(05-20-03)
2003-4-12
Push cable up under this edge
(123 kb)
Edit it
(05-20-03)
2003-4-12
Side panels must be removed to lift carpet.
(158 kb)
Edit it
(05-20-03)
2003-4-12
Pull the cable up with a coat hanger.
(187 kb)
Edit it
(05-20-03)
2003-4-12
Pull the cable through the access hole.
(216 kb)
Edit it
(05-20-03)
2003-4-12
Forward try installed, rear tray removed.
(144 kb)
Edit it
(05-20-03)
2003-4-12
The forward tray back in place with the cable installed
(139 kb)
Edit it
(05-20-03)
2003-4-12
These are 2 of the 6 screws holding the console in place.
(117 kb)
Edit it
(05-20-03)
2003-4-12
These are 2 of the screws holding the console in place.
(128 kb)
Edit it
(05-20-03)
2003-4-12
Remove door jam
(158 kb)
Edit it
(05-20-03)
2003-4-12
Not much room behind the stereo
(125 kb)
Edit it
(05-20-03)
2003-4-12
Face plate removed only.
(174 kb)
Edit it
(05-20-03)
2003-4-12
The changer mounted in the tray
(130 kb)
Edit it
(05-20-03)
2003-4-12
The right screw holds the console in place.
(139 kb)
Edit it
(05-20-03)
2003-4-12
Use a small pry bar to get the cable under interior molding
(187 kb)
Edit it
(05-20-03)
2003-4-12
These screws need to be removed to route the cable past the seat.
(196 kb)
Edit it
(05-20-03)
2003-4-12
With all the trays removed
(156 kb)
Edit it
(05-20-03)
2003-4-12
Close up of the hole from outside the tray
(160 kb)
Edit it
(05-20-03)
2003-4-12
Close up of cable hole from inside tray.
(147 kb)
Edit it
(05-20-03)
2003-4-12
The cable should end up looking like this.
(179 kb)
Edit it
(05-20-03)
2003-4-12
Use a small board to hold up the carpet while you fish the cable through
(145 kb)
Edit it
(05-20-03)
This site maintained by David Abigt
site design / content © 1995- Round Mountain Rescue Ranch
(12-31-69)
All installed
All trays installed
Push cable up under this edge
Side panels must be removed to lift carpet.
Pull the cable up with a coat hanger.
Pull the cable through the access hole.
Forward try installed, rear tray removed.
The forward tray back in place with the cable installed
These are 2 of the 6 screws holding the console in place.
These are 2 of the screws holding the console in place.
Remove door jam
Not much room behind the stereo
Face plate removed only.
The changer mounted in the tray
The right screw holds the console in place.
Use a small pry bar to get the cable under interior molding
These screws need to be removed to route the cable past the seat.
With all the trays removed
Close up of the hole from outside the tray
Close up of cable hole from inside tray.
The cable should end up looking like this.
Use a small board to hold up the carpet while you fish the cable through